|
|
Click
P25 INCINERATOR to
Download a Brochure
|
Waste Incinerators
The P25 is designed to burn Type IV pathological waste and
infectious and contaminated "red bag," surgical dressings, plastic
test devices and other wastes. If you are paying a high fee to haul
these waste materials to a disposal site, now is the time to
consider the on-site Incineration alternative.
Benefits
Fast, complete, efficient waste disposal
Heavy duty ceramic grates allow burning from below.
Concave refractory bottom acts as a hearth for waste that
falls through grate openings.
Insulated and refractory lined secondary chamber with exit
temperatures of up to 1000 deg C and one (1) second retention with
model M1.
Minimum installation and start up time
Factory assembled, aluminized steel jacket lined with
refractory and firebrick.
Monitors, recorders and other accessory equipment available.
Easy and safe operation
Large counter-balanced fill door with electrical lockout.
Automatic control system provides preset burn times and shut
off.
Reload light indicates to operator when it is time to
recharge.
Low energy consumption levels
Programmable digital temperature controls maintain
temperature, assuring complete combustion while conserving fuel.
Pressure blower with modulating air control creates turbulence
and distributes combustion air to secondary chamber.
Secondary burner with temperature activated modulating control
provides fast preheat and sustains high temperature performance at
low energy consumption levels.
Charging rate
Up to 600kgs per ten-hour day of Type IV pathological waste or
red bag waste rated at 2200 BTU's per kg. Based on batch loading
twice daily.
|
Technical
Specifications |
Model P25 |
Model P25 M1 |
|
Fuel |
Oil or Gas |
Oil or Gas |
|
Capacity (Cubic Mtr) |
0.65 |
0.65 |
|
Ave Capacity |
60 kg per hour |
60 kg per hour |
|
Fuel Consumption (ltrs / hr) |
13 |
20 |
|
External
Dimensions |
|
|
|
Length (mm) |
2300 |
2600 |
|
Width (mm) |
1220 |
1500 |
|
Height Incl. Flue (mm) |
7000 |
7700 |
|
Door Opening (mm) |
610 x 710 |
610 x 710 |
|
Internal
Dimensions |
|
|
|
Length (mm) |
1524 |
1524 |
|
Width (mm) |
620 |
620 |
|
Height (mm) |
720 |
720 |
|
Operation |
|
|
|
Min. Operating Temperature |
950 |
950 |
|
Max. Operating Temperature |
1320 |
1320 |
|
Residency Time in 2nd Chamber |
.5 sec |
1 sec |
|
Temperature Monitoring |
YES |
YES |
|
|
|
